Terry Bigham
April 22, 2020


ARLINGTON, Texas – After conducting research and performing field tests on bowling balls used in competition, the United States Bowling Congress proposes adjusting the specification for ball hardness to 73D for all models.

As part of the proposed specification change, USBC proposes eliminating the use of field tests to check bowling ball hardness because of challenges related to workability, temperature control and variances in testing devices.

Manufacturers will be asked to discontinue additional production of models previously approved below 73D by July 31, 2021. USBC is inviting a comment period for manufacturers through June 1, 2020, on the proposed changes.

The USBC Equipment Specifications Committee, which has delegated authority from the USBC Board to make equipment specification changes, proposes specification changes based on research provided by the USBC Equipment Specifications and Certifications staff.

The ESC staff conducted field tests on bowling balls at the 2020 U.S. Open and at the 2020 World Series of Bowling in advance of the 2020 USBC Masters. The field tests demonstrated urethane shells naturally become softer with use over time, compared to when initially approved, while reactive shells show little change.

While the results vary in magnitude by manufacturer, the trends were the same. USBC field testing showed five urethane ball models across three different manufacturers averaged under 72D after use.  

At time of approval, a bowling ball currently must have a hardness of 72D or higher. Raising the specification to 73D ensures reactive shell balls, which have higher hook potential than urethane, will stay above 72D hardness at all times.

The proposed specification allows balls to soften, as they naturally will with use over time. Currently, 32 ball models approved by USBC passed testing with at least one sample ball under 73D. All previously approved balls remain approved and can continue to be used in competition under the proposal, and any balls confiscated by USBC during field testing for additional research would be returned and could be used in competition. USBC does not feel having urethane balls naturally fall below the hardness specification is a competition concern, since reactive balls have more hook potential than urethane.  

USBC will maintain the requirement preventing bowlers from altering ball hardness as listed in the Equipment Specifications manual and in the USBC Rulebook (Rule 17a. Unfair Tactics):

     * The use of chemicals, or other methods, to change the hardness of the
        surface of the ball after it is manufactured is prohibited.

Visit for the 2020 Hardness Research Report and related research.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s